Ethernet IP & IPX WAN Router

• Built-in DDS 56/64 kbps CSU/DSU, RJ-48s
• Frame Relay or PPP WAN protocol
• Network Address Translation (NAT)
• Unnumbered links, RIP, and RIPv2
• Bridging of other protocols
• 10BaseT Ethernet RJ-45

Configuration and Management

• VT-100 terminal console with menus via front panel DB-25
• Telnet console, SNMP, TFTP, BOOTp

Standalone with external 115 VAC power supply

• Optional rack mount configuration in 6 slot RM-MiniRack

Physical Characteristics, Standalone

• Dimensions: 1.6" H x 6.25" W x 9.6" D
• Weight: 2.3 lb. max (includes AC transformer)
• Power Requirements: Transformer120 VAC, 34W max
• Operating Temperature: 0° to 40° C
• Storage Temperature: -40° to 70° C
• Operating Relative Humidity: 0 to 95% (non-condensing)
• FCC Part 15 Class B, Part 68, UL, CSA

Protocol Support

• IP and IPX/SPX routing, RIP (IP), RIP2/SAP (IPX/SPX)
• Network Address Translation, NAT and NAPT, up to 15
  local IP addresses
• Other protocols via transparent Bridging
• LAN Frame Types: Type II, 802.2 (LLC), 802.3 (RAW), and SNAP
• WAN Frame Types: Frame Relay (up to 14 DLCIs) and PPP
• Front Panel indicators for Power, Tests, System failure
  

LAN Interface

• Ethernet, 10BaseT (RJ-45)
• Front Panel indicators for Link and Collision
  

WAN Interface (NI)

• DDS CSU, 56 kbps or 64 kbps (clear channel)
• RJ-48s, 4 wire, cable included
• Format: Bipolar, Return-to-Zero
• Timing: Internal, Repeater NI
• Diagnostics: V.54 w/ integral 511 test generator
• Front Panel indicators for Link and Alarms
  

Management

• Console - Async RS-232, 9600 bps, DB-25, front panel
• Optional built-in V.32 service console modem
• Telnet
• BOOTp - Configuration to Flash
• TFTP (client) - Operating system & configuration to Flash
• SNMP - Private Enterprise MIB and MIB II